 |
 |
 |
| Reactor Flask, Round Bottom , 2 Liter – MAS 1822.20
Reactor Flask, Round Bottom , 5 Liter – MAS 1822.50 Lid Separate with 4 Necks, for 2Lit Center B34, Other side 3-necks 24/29 – MAS 1823.20 Lid Separate with 4 Necks, for 5 Lit Center B34, Other side 3-necks 24/29 – MAS 1823.50 Flange Clamp, Wire Type 100mm/4 inch – MAS 1824.4 Flange Clamp, Wire Type 150mm/6 inch – MAS 1824.6 Lid Separate with 5 Necks, for 2Lit Center B34, Other side 4-necks 24/29 – MAS 1823.20-5 Lid Separate with 5 Necks, for 5 Lit Center B34, Other side 4-necks 24/29 – MAS 1823.50-5 |
Reactor Flask, 2L / 5L Supplied with Separate 4/5 Neck Lids
Center Neck is 34/35 other All 3/4 Necks are 24/29
Separate Lid comes with Metal Clamp to Join Lid with Reactor Flask,
Separate Lid is Created for Resin Chemicals Heating over 360c
Flask bottom find chemical Burns marks/ Stick of Thick burn layer of chemicals cleaning. Remove lid and clear flask bottom easily.
Recommend High temperature Heating use Reactor Flask.
Separate Lid Center Neck Recommend for Glass/ PTFE /Steel Rod
Rod/Shaft / Stirrer
Stirrer Shaft create with out Blade which Help installation of Lid on Flask,
Stirrer Shaft required separate Blade on bottom PTFE Material.
Lid Center Neck required PTFE Material Stopper/Pulley with hole for Stirrer Shaft.
Side Condenser Connection must be use Vacuum Receiver adopter to connect with vacuum Pump,
Vacuum Pump Suck Air and create Vacuum in Reactor Flask.
Normal heating temperature will not rise inside flask more then 250c it is recommend to create vacuum which Allow Temperature to Reach near 350c.
Only heating is allow with Heating Mantle, burner or Hotplates are now allow to heat these Glassware.