Specification :
| Cable length | 1000mm |
| Cap Diameter | 16mm |
| Commodity Code | 90279090 |
| Concentration Range | 0.02-1900 ppm |
| Connector | BNC |
| Diameter | 12mm |
| Endpoint time | Typically 10-60 seconds |
| Interferences | Hydroxide |
| length | 155mm |
| pH range | 4-8 pH |
| Potential Drift | 2mV per Day |
| Reference Type | Single Junction |
| Resistance at 25 Deg C | < 2.5 MOhm |
| Temperature range | 5-50 Degrees C |
- Rugged Solid State Sensors
- No Filling solutions
- No membrane replacements
- Built in dry Reference electrode
- Waterproof and submersible
- Suitable for Laboratory and Field work
- Compatible with all pH and Ion Meters
- Stored dry for long lifetime
- Low cost
- Easy to use
The Nitrate sensor is PVC based with a solid state mount and does not degenerate during storage unlike conventional Nitrate electrodes. The lack of internal solution means that submersion is also possible as the sensor does not flex under reasonable pressure.
Each EDT directION Combination ISE has a 1 meter cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models.