This Density Bath is designed in accordance with ASTM D-1298, enabling accurate determination of density, relative density, or API gravity of crude petroleum and other liquid hydrocarbons using a precision glass hydrometer.
The setup includes a constant temperature bath equipped with advanced features to ensure accurate and consistent results in laboratory conditions
.Conforms to ASTM D-1298 standards for precise density and API gravity measurement
- High-quality constant temperature bath with PID digital temperature controller
- Integrated heating, refrigeration, and circulation system for excellent thermal stability
- Temperature range: Available for both above and below ambient temperatures
- Capacity: Accommodates 2 hydrometer cylinders simultaneously
- Operates on 230V ±10% AC, 1 Phase, 50 Hz power supply
- Ideal for petroleum testing labs, research facilities, and quality control environments.
This hydrometer-based density measurement system ensures reliable performance, superior temperature control, and compliance with international testing standards.
CONSTRUCTION: Rectangular model having double walled construction with toughened glass observation
window and illumination from rear side provided. Inner working chamber is constructed of 14 SWG, 304 AISI,
Stainless steel buffed to mirror polish. Outer body made of 20 SWG, CRCA sheet duly powder coated. ’PUF’
insulation provided in between the walls to prevent temperature loss. The liquid reservoir is provided with
3/8“stainless steel ball valve. Stainless steel lid will be supplied with provision to hold two density cylinders.
Table top model.
COOLING / REFRIGERATION SYSTEM: A well balanced CFC-free refrigeration system comprising of Emersion
make hermetic sealed compressor, condenser, condenser fan motor, Donfoss make dryer, header, cooling coils,
capillary, CFC-free refrigerant.
The refrigeration system is housed in the same enclosure as that of liquid reservoir.
HEATING SYSTEM: Oil immersion heaters and well balanced refrigeration system help achieve above and below
ambient temperature respectively. Heater is inter connected to the PID output. Heater wiring done using Teflon
coated cable.
CIRCULATORY SYSTEM: Thermo stirrer driven by heavy-duty capacitor run AC motor helps maintain uniform
temperature across the bath media.
TEMPERATURE CONTROLLER AND INSTRUMENTATION: Microprocessor based PID temperature controller with
two displays for set and process value with feather touch key board and PT-100 sensor incorporated.
TECHNICAL DATA:
MOC inner : 304 Stainless steel.
MOC outer : Epoxy Powder Coating.
Control System : Microprocessor based PID with PT–100 sensor.
Bath Heater : 2 Kw.
Condensing unit : ‘Emersion’ make hermetic sealed.
Coolant : R134a CFC–free.
Bath Circulatory Motor: 1/12 HP, 1400 rpm.
Total Rating : 16 Amps.
Working Size : 11” x 8” x 16” H.
Power supply : 230 +10% Volt AC, 1 Phase, 50 Hz.
Temperature range : –100C to +500C.
DENSITY GLASS HYDROMETERS
To supply Petroleum Density glass Hydrometers “ISI” marked calibrated at 150C/200C (M-50SP Type) with
calibration certificate traceable to National standards.
Hydrometers – MAS Scientific
You have to purchase 2 Nos. of each.
A) 0.600 – 0.650 g/ml
B) 0.650 – 0.700 g/ml
C) 0.700 – 0.750 g/ml
D) 0.750 – 0.800 g/ml
E) 0.800 – 0.850 g/ml
F) 0.850 – 0.900 g/ml
G) 0.900 – 0.950 g/ml
H) 0.950 – 1.000 g/ml
I) 1.000 – 1.050 g/ml
J) 1.050 – 1.100 g/ml
K) 1.100 – 1.150 g/ml
Hydrometer Cylinder Glass with out spout – MAS 2670
WIL–545 DENSITY BATH FOR MEASURING CYLINDER
Origin : INDIA.
