Specification :
| Cable length | 1000mm |
| Cap Diameter | 16mm |
| Commodity Code | 90279050 |
| Concentration Range | 1-35,500 ppm |
| Connector | BNC |
| Diameter | 12mm |
| Endpoint time | Typically 10-60 seconds |
| Interferences | Iodide, Bromide, Cyanide Sulphide |
| length | 155mm |
| pH range | 1-12 |
| Potential Drift | 2mV per Day |
| Resistance at 25 Deg C | < 2.5 MOhm |
| Temperature range | 5-50 Degrees C |
Rugged Solid State Sensors
No Filling solutions
No membrane replacements
Built in dry Reference electrode
Waterproof and submersible
Suitable for Laboratory and Field work
Compatible with all pH and Ion Meters
Stored dry for long lifetime
Low cost
Easy to use
The Chloride Sensor is a crystalline material which can be polished when the slope decreases over time. This will rejuvenate the sensor and give a longer lifetime. The sensor should be stored dry to with its protective cap on.
Each EDT directION Combination ISE has a 1 meter cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.
The solid state sensors have a huge advantage over conventional ISEs in that there is no internal fill solution to degenerate the sensor this means that EDT direction combination ISEs have an unrivalled lifetime and a very low cost of ownership.
EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.
For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Click here to see a simple calibration procedure or learn more about the principles of ISE.