Unstirred Water Bath Specifications
| Genlab ref. Number | Capacity (approx litres) | Internal dims. (D x W x L cms) | External dims. (H x W x L cms) | Wattage | Voltage | Weight (kg) |
| 4156-WBH8 | 8.1 | 20 x 30 x 15 | 31 x 33 x 29 | 400 | 230 | 6 |
| 4156-WBH13 | 12.5 | 15 x 30 x 32 | 26 x 33 x 47 | 800 | 230 | 7 |
| 4156-WBH18 | 17.3 | 20 x 30 x 32 | 31 x 33 x 47 | 800 | 230 | 9 |
| 4156-WBH27 | 27 | 20 x 30 x 50 | 31 x 33 x 65 | 1200 | 230 | 11 |
| 4156-WBH54 | 53.8 | 20 x 49 x 61 | 32 x 66 x 65 | 2400 | 230 | 25 |
Ordering
All units have a powder coated mild steel exterior with stainless steel available as an option. All units come fully insulated with a stainless steel interior bath. Lids need to be ordered separately as an option. Where options are required, simply add the option code to the original reference.
Note, adding a drain valve and tap will add 5cm to overall height
E.g. WBH13 with stainless steel exterior and gabled lid becomes 4156-WBH13/SSE/GL
Unstirred Water Bath Accessories
- Stainless steel flat lid – FL
- Gabled lid – GL
- Stainless steel body – SSE
- Drain valve and tap – DVT
- Traceable calibration – SPC
- Extended warranty – X1
Features
- 5 sizes: 8 to 54 litres
- Temperature range 25ºC to 80ºC (without lid)
- Temperature range 25ºC to 100ºC (with lid)
- Thermostatic control
- Easy clean powder coated body
- Stainless steel tank
- Internal overheat protection
Options
- Stainless steel flat lids
- Gabled lids
- Stainless steel external body
- Traceable calibration to national standards
- Drain valve and tap
- Extended warranty
Unstirred Water Bath Design
The exterior is constructed from sheet steel finished in an easy clean powder coated paint. It is fitted with a stainless steel interior bath which will allow filling up to 90% total volume. Each bath is supplied with stainless steel base tray. Heating is applied to the base of the bath, which enhances temperature uniformity and optimises internal spaces.
Heating
Heated by silicone heater mats with integral safety shut down if detecting dry boil conditions. Please note these baths are not designed to dry boil so always ensure water is in the bath before you turn on.
Controls
The control system comprises of a sample thermostatic dial, with element indication. The temperature set point can be locked in place once set with the locking mechanism