Product Name : Microbial Fuel Cell
Accessories introduction:
Learn from past experience, the product structure is adjusted and upgraded.
1. There is a concave step at the link between the bottle and the bottle, and a high-quality special corrosion-resistant ring is added inside.
2. The links are made of imported stainless steel clips. Ensure a safe seal.
3. GL45 lid is equipped with a solid lid or a hollow lid. The cover material is divided into PP or PBT. PP is 140 degrees and PBT is 180 degrees.
4. The side interface is equipped with a GL14. PBT cover with a temperature resistance of 180 degrees.
5. The pipe joint is made of PBT material with a temperature resistance of 180 degrees.
6. Upgrade the special PTFE balance fixed flange between the flange and the flange, and the PTFE flange plays the role of balancing two bottles. Reduce the risk of leakage.
Microbial fuel cell: The glass is an explosion-proof reagent bottle made of standard borosilicate 3.3 glass, transparent and colorless, transparent brown. The coefficient of thermal expansion is low (20 degrees -300 degrees), can resist chemical erosion, and has extremely high resistance to water, acid, strong alkali, salt solution, organic matter and halogen. High temperature resistance (can be autoclaved by 140 degrees steam for sterilization), high thermal shock resistance (rapid change temperature 280 degrees), compression resistance (-1-15 BAR), uniform wall thickness, and the thinnest part is not less than 2.2MM;
